BFHZJ - ENAMEL ALKYD GLOSS GREEN 14159
- MSDS: BFHZJ
- Manufacturer: PRATT AND LAMBERT
- Product Name: ENAMEL ALKYD GLOSS GREEN 14159
- National Stock Number: 8010-00-616-7500
Product Identification
Product ID:ENAMEL ALKYD GLOSS GREEN 14159
MSDS Date:01/01/1987
FSC:8010
NIIN:00-616-7500
MSDS Number: BFHZJ
Responsible Party
WICHITA, KS 67201
US
Cage: 61196
Contractor
Telephone: 216-566-2902
Cage: 61196
Ingredients
MINERAL SPIRITS
CAS: 64475-85-0
RTECS: PY8240000
ACGIH TLV: 100PPM
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
IRON OXIDE
CAS: 1309-37-1
RTECS: NO7400000
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
Hazards
Effects of Overexposure:PNEUMOCONIOSIS,PERMANENT NERVOUS SYSTEM
DAMAGE,INTERNAL ORGAN DAMAGE.DELIBERATE INHALATION HARMFUL.
First Aid
First Aid:INGESTION:GET IMMEDIATE MEDICAL ATTENTION.INHALATION:REMOVE
TO FRESH AIR.RESTORE BREATHING.KEEP WARM AND QUIET.CONSULT
PHYSICIAN.EYES:15 MINUTE WATER FLUSH.CONSULT PHYSICIAN.SKIN:REMOVE
CONTAMINATED C LOTHING.WASH SKIN WITH SOAP AND WATER.
Fire Fighting
Flash Point:30F,27C
Extinguishing Media:CARBON DIOXIDE,DRY CHEMICALS,ALCOHOL,POLYMER FOAMS.
Fire Fighting Procedures:SELF CONTAINED BREATHING APPAR.WATER-FOG TO
COOL CONTAINERS.
Unusual Fire/Explosion Hazard:CONTAINER EXPLOSION HAZARD DUE TO EXTREME
HEAT,EXPOSURE TO SOURCES OF IGNITION.
Accidental Release
Spill Release Procedures:REMOVE SOURCES OF IGNITION.CONTAIN WITH INERT
MATERIAL.TRANSFER TO COVERED METAL CONTAINERS.PREVENT ENTRY TO
DRAINS,SEWERS AND GROUND WATER,WEAR RESPIRATORS,EYE,SKIN
PROTECTION.REMOVE LIQUID WITH INER T ABSORBENT AND NON-SPARKING
TOOLS.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F.STORE LARGE
QUANTITIES IN COMPLIANCE WITH OSHA 29CFR1910.106.CLOSE CONTAINER
AFTER USE.DO NOT BREATHE FUMES,SANDING PARTICLES.
Other Precautions:DO NOT WELD,CUT OR BRAZE EMPTY CONTAINER.DO NOT CLEAN
AND RE-USE CONTAINER.DO NOT USE PRESSURE TO EMPTY CONTAINER.GROUND
AND BOND CONTAINER TO RECEIVING VESSEL.
Exposure Controls
Respiratory Protection:NIOSH APPRVD MECH RESPIRAT TO REMOV OVERSPRAY
WHN SPRAYING IN OUTDR
Ventilation:LOCAL VENTILATION/EXHAUST TO REMOVE DECOMPOSITION
BYPRODUCTS
Protective Gloves:SOLVENT RESIST.
Eye Protection:FACE SHIELD;SHIELDED SPEC
Other Protective Equipment:PROTECTV EQPMT TO PRVNT SKN CONTCT.SE
OSHA,29 CFR 1910.1025
Supplemental Safety and Health
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:244F,118C
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:61
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS,ALKALINES,OXIDIZERS.
Stability Condition to Avoid:EXCESSIVE HEAT.SOURCES OF IGNITION.
Hazardous Decomposition Products:CO,CO*2,SMOKE FROM IGNITION
Conditions to Avoid Polymerization:DO NOT ADD DRIERS OR REACTIV CHEM
W/O TECHN SUPERVISION.
Disposal
Waste Disposal Methods:DO NOT INCINERATE CLOSED CONTAINERS.DISPOSE OF
IN ACCORDANCE WITH EPA,LOCAL,STATE AND FEDERAL REGULATIONS FOR
FLAMMABLE,HAZARDOUS WASTES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.